|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
I recently bought a Iketa IT-407 12" arm. While I follow the template and the exact measurements of the effective length and the cartridge tip to the headshell base, I can not get the perpendicular reading on the universal protractor that I used with 8" arms.I am certain that my measurements are correct. Ikeda does not provide a protractor and therefore I don't know what is wrong or I should in fact not use the protractor for 8" arms.
Are there differences between protractor for 8" and 12" arm? If so, where can I get one for 12" arm?
This post is made possible by the generous support of people like you and our sponsors:
Topic - A different protractor for 12" arm? - Sea Monster 10:27:39 09/09/06 (12)
- I don't know if you heard this caution before, but... - NewStevo 08:42:16 09/10/06 (0)
- Same protractor for all arm lengths. The problem is ... - Garth 12:00:11 09/09/06 (10)
- Re: Same protractor for all arm lengths. The problem is ... - Sea Monster 18:39:18 09/09/06 (7)
- According to the manual .... - Garth 01:27:33 09/10/06 (6)
- Re: According to the manual .... - Sea Monster 03:38:25 09/10/06 (5)
- No, the manual is correct.... for use with this ... - Garth 04:10:09 09/10/06 (4)
- The measurement is in fact from stylus tip to headshell base - Sea Monster 06:25:40 09/10/06 (3)
- What does stylus tip to headshell base mean? - Garth 06:36:22 09/10/06 (2)
- Re: What does stylus tip to headshell base mean? - Sea Monster 05:09:59 09/11/06 (1)
- Less elegant than what? - Garth 05:19:29 09/11/06 (0)
- I use a 12" Ikeda with an Ortofon SPU - Allan Songer 14:27:29 09/09/06 (1)
- The Ortofon SPU changed the effective length vs. the original headshell. - Garth 01:57:12 09/10/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
