Re: Been looking, too. Most promising is here. (link) - tketcham

Follow Ups Full Thread

Topic - Phono preamp with MC loadings below 100 Ohms? - tketcham 09:05:04 09/08/06 (43)

JUST wanted to say thanks to everyone before the thread dives to the bottom... - tketcham 22:12:42 09/08/06 (0)

Don't confuse input impedance with ... - Garth 10:30:21 09/08/06 (4)

Re: Don't confuse input impedance with ... - tketcham 11:37:45 09/08/06 (3)

Re: Don't confuse input impedance with ... - bjh 14:23:35 09/08/06 (2)

Good point... - tketcham 18:13:35 09/08/06 (1)

Absolutely, why not experiment! Here's a *trick* to get 50ohm without *any* resistors, no soldering, nada ... - bjh 20:35:33 09/08/06 (0)

The Musical Surrounding Phonomena has input loading settings as low as 30 Ohms - tpao 10:06:10 09/08/06 (2)

Re: The Musical Surrounding Phonomena has input loading settings as low as 30 Ohms - tketcham 10:18:14 09/08/06 (1)

Re: The Musical Surrounding Phonomena has input loading settings as low as 30 Ohms - tpao 12:33:45 09/08/06 (0)

Trichord Dino+ has 33, 100, 1k, 47k Ohms settings (nt) - Tawe 09:44:27 09/08/06 (1)

Re: Trichord Dino+ has 33, 100, 1k, 47k Ohms settings (nt) - tketcham 10:21:09 09/08/06 (0)

Step-up and pre-preamp ... - bjh 09:43:39 09/08/06 (2)

Re: Step-up and pre-preamp ... - tketcham 10:23:27 09/08/06 (1)

Re: Step-up and pre-preamp ... - bjh 10:32:28 09/08/06 (1)

Been looking, too. Most promising is here. (link) - HenryH 09:34:47 09/08/06 (3)

Re: Been looking, too. Most promising is here. (link) - tketcham 09:48:39 09/08/06 (2)

Uh, Tom, look again. - HenryH 09:52:37 09/08/06 (1)

Doh! nm - tketcham 09:56:59 09/08/06 (0)

Why not just adjust the one you have? - Garth 09:23:49 09/08/06 (12)

Re: Why not just adjust the one you have? - tketcham 09:32:30 09/08/06 (11)

And what are those? Do you like them? (nt) - Garth 10:43:53 09/08/06 (10)

Re: And what are those? Do you like them? (nt) - tketcham 11:48:32 09/08/06 (9)

I have no problem with system listings. I simply choose to not list my system. Anyway ... - Garth 12:08:51 09/08/06 (8)

Yes, indeed. - tketcham 12:16:56 09/08/06 (7)

Ok, just wanted to know what you really wanted to do. Here goes .... - Garth 13:18:55 09/08/06 (6)

Thanks, Garth. Now for the $64,000 question(s)... - tketcham 18:37:38 09/08/06 (4)

And the 2 bit answer .... - Garth 23:29:38 09/08/06 (3)

FYI - mosin 10:25:04 09/09/06 (0)

The nearest Radio Shack is over 160 km away... - tketcham 02:00:16 09/09/06 (1)

Oh man, Omak! - Garth 02:34:25 09/09/06 (0)

Thanks Garth, I also really wanted to just try on my Rogue nt./ - valvesonly 16:58:50 09/08/06 (0)

Re: Phono preamp with MC loadings below 100 Ohms? - pocketchange 09:15:25 09/08/06 (1)

Re: Phono preamp with MC loadings below 100 Ohms? - tketcham 09:37:58 09/08/06 (0)

Re: Phono preamp with MC loadings below 100 Ohms? - Ray-o-Stat 09:10:25 09/08/06 (9)

Re: Phono preamp with MC loadings below 100 Ohms? - tketcham 09:49:48 09/08/06 (8)

Well... - Ray-o-Stat 11:12:14 09/08/06 (7)

Or, with this I can adjust the input impedance from ... - Garth 13:33:07 09/08/06 (4)

Didn't QED have something like this way back in the day? /nt\ - Ray-o-Stat 20:39:16 09/08/06 (1)

No idea. Didn't they sell connectors and wire? (nt) - Garth 23:24:52 09/08/06 (0)

Re: Or, with this I can adjust the input impedance from ... - tketcham 18:20:08 09/08/06 (1)

Same basic method slightly different implimentation - Garth 23:23:54 09/08/06 (0)

Seems you have an undiscoverd and now lost gem! nm - tketcham 11:46:44 09/08/06 (1)

Yep. I dread the day... well, you know. /mt\ - Ray-o-Stat 12:00:33 09/08/06 (0)

Follow Ups

Re: Been looking, too. Most promising is here. (link) - tketcham 09:48:39 09/08/06 (2)

Uh, Tom, look again. - HenryH 09:52:37 09/08/06 (1)

Doh! nm - tketcham 09:56:59 09/08/06 (0)