|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Micro Seiki Tonearm posted by Valis on August 12, 2006 at 06:05:12:
Hi,I have a MA-505X (not Mk III) with a damping arrow. It measures 0.50" side to side, 0.084" thick, about 0.25" from the bottom tip to the widest part, then another 0.07" to where it joins the shaft (so 0.32" from the bottom to the shaft). The tip has a flat that measures about 0.095", and the widest part has flats that measure about 0.047". All measurements done with a calipers. It is also curved to match the curve of the damping trough, and is made of black plastic. Of course the amount of damping also depends on the viscosity of the fluid, so if your dimensions differ you could use a thinner or thicker fluid. HTH.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Micro Seiki Tonearm - JimL 11:10:49 08/12/06 (2)
- Re: Micro Seiki Tonearm - Valis 19:09:34 08/12/06 (1)
- Re: Micro Seiki Tonearm - JimL 22:15:46 08/12/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
