Could an owner of a Graham 2.2 help me with the side VTA scale?

Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

64.12.116.131

I have missplaced some of the paperwork from my 2.2 arm. I am trying to do an accurate VTA adjustment(variable).
The Graham 2.2 has a vertical side scale with markings 1 2 3 4, with 4 lines between each number, also on top is a round dial with markings 0 1 2 3 4 also with 4 lines between numbers.
I am following instructions from www.enjoythe music which may say "...lower the back 0.010"(250 micrometers)" or "...lower the back 0.005".", or "...raise the back 0.010 (0.4mm).
What I`m asking is what is the value of the space between each of the lines inbetween 1 2 3 4 ?
My neutral horizontal starting point now is exactaly between 2 and 3 on the side scale BUT it reads near 4 on the round top dial.
Is there a way to adjust this top dial so it reads the same as the side vertical scale?
Thanks for any and all help.
Len W.
WernerLen@aol.com

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - Could an owner of a Graham 2.2 help me with the side VTA scale? - WernerLen 12:46:24 07/18/06 (3)

Re: Could an owner of a Graham 2.2 help me with the side VTA scale? - Terry 14:36:03 07/18/06 (1)

Yes it does (address the question) ... - andyr 03:53:26 07/19/06 (0)

Re: Could an owner of a Graham 2.2 help me with the side VTA scale? - unclestu52 14:00:39 07/18/06 (0)

You can not post to an archived thread.