|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Newbie needs help with VPI Scout/JMW9 set up posted by splunge on July 15, 2006 at 15:52:12:
the scout is pretty much plug and play, but the arm has to be right on the pivot point, or it ain't gonna play properly. lift the arm up, and try to get the sharp point right on to the bottom of the arm. if it's right, it'll wobble a bit when you set it on a record, but not that much. if that's still not getting it done, and you're sure the arm is on properly, then it could very well be not enough vtf. this to is easy to fix, but you will need a guage to get it done. the shure is pretty good and cheap, although at some point i'd reccomend a digital scale. these can also be had relatively inexpensively.you got a great table. don't worry, shortly things will be terrific.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- it might be the arm - sberger 20:26:09 07/15/06 (1)
- Yes, check this, it's very important and very easy to do incorrectly. - orpheus 00:02:04 07/16/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
