|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: What Fred J said is true posted by Doug Deacon on January 17, 2006 at 13:52:53:
Hi,What Fred said is almost certainly incorrect for the very reason you state. The motor structure (i.e. the magnet or magnets) is almost certainly aligned with the cartridge body by design. No amount of tolerance stack will allow for a visually misaligned cantilever. I know I've never seen it in my 35 or so years playing with this stuff. If however, like you stated, the cantilever and motor assembly are incorrectly mounted in the body, then, yes, not too big a deal and in fact correctible but still VERY disturbing, No?
Yeah, I've seen lots of cartridges with misaligned cantilevers which I think resulted from (most likely) incorrect antiskate (way too much is very common). Never a NEW one, though. Any and all new cartridges with misaligned cantilevers need to go back. They are either 1) NOT new or 2) production rejects.
Cheers, Joe
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: What Fred J said is true - JoeLip 06:02:23 01/18/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
