Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Static problems with LP12

When playing a side of an LP, I get a gradual static charge build-up by end-of-side, which results in the felt mat "sticking" to LP when lifted off the platter. If pre-amp not set to "Mute", there are little "pops" from the speakers that are generated by static discharge from TT to hand.

Plan A is to get some double-sided Scotch-tape to "lock" the felt mat to the platter as a way of stopping the "lift-off syndrome".

For Plan B, there must be some way of grounding the LP to the chassis of the TT (which is earthed to the amp via the "earth terminal").

My somewhat vague recollections of Physics 101 and the theory behind the Van Der Graaf generator, indicate that some form of conductive "brush" - grounded to the chassis - should pick up any charge from the LP surface and dissipate it to ground.

The theory being based on charge collection by smaller radius of brush-tips...

If anyone knows of any product available that addresses this problem, I would be grateful for any links/etc.

Its summer here in S. Africa and its also been a bit dry - so static is a major hassle and is causing me to spin more silver than black... :-(

DE


Image Hosted by ImageShack.us

"Don't roll those blood-shot eyes at me!"


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Topic - Static problems with LP12 - DevillEars 08:43:47 12/14/05 (24)


You can not post to an archived thread.