Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Re: need help with nott horizon/rb250 setup (overhang) posted by imrer on October 31, 2004 at 10:57:05:
As I recall Professor Elison determined that the Clearaudio alignment tool is correct only for the stock Rega 222mm distance. If you change the arm's mounting distance to anything other than 222mm than the Clearaudio tool will not give you correct alignment.I don't quite understand what you mean by "ends up angling the arm such that the headshell is much too close to the platter edge". I've never seen a Horizon except in photos but I do own a Spacedeck. Judging from pictures it looks like the arm is attached to the Horizon by one or more allen screws pressing on the arm's pillar. If that's right then you should be able to loosen the arm mount and rotate it horizontally until it clears the platter.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: need help with nott horizon/rb250 setup (overhang) - Rob Doorack 12:19:42 10/31/04 (5)
- d'oh (insert head slap here) - imrer 12:56:28 10/31/04 (4)
- Re: d'oh (insert head slap here) - Rob Doorack 07:53:56 11/01/04 (3)
- not picky - imrer 19:04:17 11/01/04 (2)
- Re: not picky - Rob Doorack 07:53:55 11/02/04 (1)
- Re: not picky - imrer 13:11:41 11/02/04 (0)