RE: How to set Azymuth by measurements

Posted by Lew (A) on February 26, 2025 at 16:16:50

In Reply to: RE: How to set Azymuth by measurements posted by ecl876 on February 24, 2025 at 12:46:31:

+1. Plus, there is no such thing as "correct azimuth". There is only a best compromise, and in the process any non-expert azimuth adjuster is likely to be dialing in distortion due to the stylus engaging the groove at an angle which can not only introduce distortion but also inevitably results in aberrant stylus wear and damage to the groove. I just set the stylus square to the groove, and I do not bother to measure the resulting crosstalk.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - How to set Azymuth by measurements - Gera 09:51:49 02/24/25 (10)

MOFI GEODISC RE: How to set Azymuth by measurements - Audioquest4life 03:55:37 02/26/25 (3)

RE: You seem not to understand what correct azimuth involves? nt - andyr 03:41:37 03/13/25 (0)

This laser has been handy while using the Geodisc . . . - alaskahiatt 13:18:47 03/01/25 (0)

OK, but no - M3 lover 08:58:09 02/28/25 (0)

RE: How to set Azymuth by measurements - billo 19:03:18 02/25/25 (0)

RE: How to set Azymuth by measurements - M3Man 15:52:49 02/25/25 (0)

The details of cartridge alignments - M3 lover 07:49:32 02/25/25 (0)

RE: How to set Azymuth by measurements - ecl876 12:46:31 02/24/25 (1)

RE: How to set Azymuth by measurements - Lew 16:16:50 02/26/25 (0)

RE: How to set Azymuth by measurements - 13th Duke of Wymbourne 12:20:38 02/24/25 (0)

Follow Ups

RE: How to set Azymuth by measurements - Lew 16:16:50 02/26/25 (0)

RE: How to set Azymuth by measurements

Post a Message!