Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

RE: Update 2: It was the belt...

it was slipping around the pulley on the motor pod. I took off the belt and put my fingers on the pulley to make sure it was working when I push the momentary button on the pod and it was working and had torque.

I cleaned the pully with Rubbing Alcohol and bunch of black stuff came off of it. I then washed the clear belt with warm water and dry it with a clean towel. I then got some soft cotton towels with water water wiped the sides of the Acrylic Platter and some dirt came off that too. Wiped it dry and then put the belt back on and all was good!

Whew! I thought the Teres motor pod took a dump but all is good now. I did order a new clear belt.

The Sowter SUT is in the chain and is working fine and sounds really nice!

A big decision is coming with the SPL Audio Phonos when I get it back from the repair shop. I may not put it back into the system. I also ordered a EAR 834P Clone with separate power supply chassis. We'll see how this sounds in the system with SUT.

Edits: 10/17/23

This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  

Follow Ups Full Thread
Follow Ups
  • RE: Update 2: It was the belt... - Cougar 15:48:28 10/17/23 (0)


Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.