RE: capacitance serttings

Posted by andyr (M) on September 22, 2023 at 05:16:29

In Reply to: RE: capacitance serttings posted by Yeti42 on September 21, 2023 at 11:26:26:

17D3 has a coil impedance of 32 ohms according to the specs on the DV web-site.

As such, I would suspect the optimal loading could be anywhere between 330 ohms (10x) and 3300 ohms (100x).

So your choice of 470 ohms (which is all the Naim Superline offers) does not, I suggest, let it shine. :-((

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - capacitance serttings - posaune32foot@gmail.com 05:00:05 09/18/23 (12)

i always START at 100 ohms - hifitommy 13:55:32 09/26/23 (1)

C not R -nt - E-Stat 11:10:13 09/29/23 (0)

RE: capacitance serttings - Yeti42 11:26:26 09/21/23 (4)

RE: capacitance serttings - andyr 05:16:29 09/22/23 (3)

RE: capacitance serttings - Yeti42 16:40:36 09/22/23 (2)

RE: Aah, thanks for putting me right ... - andyr 18:40:48 09/22/23 (1)

RE: Aah, thanks for putting me right ... - Yeti42 14:17:45 09/30/23 (0)

RE: capacitance serttings - flood2 15:28:54 09/18/23 (3)

"Low output MCs are insensitive to capacitive loading" - 1973shovel 05:23:15 09/19/23 (2)

RE: "Low output MCs are insensitive to capacitive loading" - Lew 12:44:06 09/30/23 (0)

It is easy enough to just add a capacitor. - Tre' 18:52:17 09/25/23 (0)

RE: capacitance serttings - Story 05:23:39 09/18/23 (0)

Follow Ups

RE: capacitance serttings - andyr 05:16:29 09/22/23 (3)

RE: capacitance serttings - Yeti42 16:40:36 09/22/23 (2)

RE: Aah, thanks for putting me right ... - andyr 18:40:48 09/22/23 (1)

RE: Aah, thanks for putting me right ... - Yeti42 14:17:45 09/30/23 (0)

RE: capacitance serttings

Post a Message!