|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Loading an AT-95 Cart posted by sisterray on December 5, 2022 at 08:26:35:
Standard for MM carts. AT recommends setting capacitance at 100-200pf.
I've a lot of experience with AT carts but not the old 95 (I've got the newer VM95C). Older ATs like 100-200pf, the newer VM series is much less sensitive.
I used an AT 150MLx with a Bottlehead Seduction phono pre (50pf) and low capacitance Blue Jeans interconnects and the cart sounded smooth and sweet. Capacitance over 200pf made it sound brighter.
On the other hand, the VM540ML doesn't seem to my ears any different at 300pf as it is at 100pf.
The blissful counterstroke-a considerable new message.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Leave the resistance at 47KOhms. - ghost of olddude55 08:53:20 12/05/22 (7)
- RE: Leave the resistance at 47KOhms. - sisterray 10:39:18 12/05/22 (6)
- RE: Leave the resistance at 47KOhms. - hesson11 14:40:19 12/05/22 (0)
- In that case, just play records. - ghost of olddude55 10:41:53 12/05/22 (4)
- RE: In that case, just play records. - sisterray 16:20:57 12/05/22 (3)
- If you can believe the interwebs, it's 220pf. - ghost of olddude55 04:03:32 12/06/22 (0)
- RE: In that case, just play records. - DaveV 16:39:26 12/05/22 (1)
- RE: In that case, just play records. - Leefy 17:36:00 12/05/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
