Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: VPI 16.5 RCM leaking posted by wires on July 24, 2022 at 08:26:19:
Good advice here.
It really is a simple device so shouldn't be difficult. No need to call a plumber. ;^)
BTW, I found my 16.5 would heat up if I cleaned more than 3-4 records at a session. The spindle actually became hot. So I got a Whisper Fan and mounted that on the back, wiring it to the vacuum switch to turn on at the same time.
No noticeable difference in the noise and it has run cool ever since.
"The secret of life is honesty and fair dealing, if you can fake that you've got it made." Groucho
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Repair - M3 lover 12:13:29 07/24/22 (3)
- RE: Repair - Capt. Z 14:26:03 07/25/22 (0)
- Thanks for the confirmation. I purchased a whisper fan a long time - alaskahiatt 17:01:39 07/24/22 (1)
- RE: Thanks for the confirmation. - M3 lover 14:47:15 07/25/22 (0)