See if you can find the schematic on-line,,,

Posted by Lew (A) on November 11, 2021 at 16:07:40

In Reply to: RE: Where to get vintage Technics table recapped and checked? posted by David Lawrence on November 11, 2021 at 06:26:02:

Most schematics will include a parts list. From that information, you can tell what electrolytic capacitors are needed. (Film capacitors last "forever", unless they are subject to voltages that exceed their rated capacity.) You can purchase the needed electrolytic capacitors from Mouser or Digikey. Service and response time for either company is exemplary. If you know how to solder, you are in business. If you don't want to DIY, any competent tech can take over after that and do the installation for you in an hour or two. You will have saved money at least by supplying the needed parts in advance.

EDIT. Post facto, I see that M3Lover already found the Service Manual on Vinyl Engine.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Where to get vintage Technics table recapped and checked? - David Lawrence 06:01:01 11/11/21 (11)

Any established tech rep - M3 lover 09:50:34 11/11/21 (0)

somebody here recommended a tech for my sp-10mk2, but I can't seem to find the link. - peteSF 09:12:44 11/11/21 (6)

RE: somebody here recommended a tech for my sp-10mk2, but I can't seem to find the link. - Sibelius 10:19:38 11/11/21 (5)

Not the same one, but thanks, a local place is a great resource. (NT) - peteSF 15:00:47 11/11/21 (4)

JP Jones? - Lew 21:43:26 11/12/21 (3)

Well known SP-10 repair - M3 lover 12:57:58 11/14/21 (1)

Bill is great for SP10s, both Mk2 and Mk3, but.. - Lew 11:54:47 11/15/21 (0)

I think that's the one.. . . - peteSF 23:15:23 11/12/21 (0)

RE: Where to get vintage Technics table recapped and checked? - samstone 06:12:14 11/11/21 (2)

RE: Where to get vintage Technics table recapped and checked? - David Lawrence 06:26:02 11/11/21 (1)

See if you can find the schematic on-line,,, - Lew 16:07:40 11/11/21 (0)

Follow Ups

See if you can find the schematic on-line,,, - Lew 16:07:40 11/11/21 (0)

See if you can find the schematic on-line,,,

Post a Message!