Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Hi All-
I just received an arm back from re-wiring and service. 3 of 4 cartridge clips are filled with solder such that I can only slide the clip on ~2 mm. Any tricks for a quick fix or do the clips need to be replaced?
Thank you!
This post is made possible by the generous support of people like you and our sponsors:
Topic - Cartridge clips are filled with solder - Wtucker1 16:09:50 02/22/21 (12)
- Send the arm back and tell them to do it properly. (nt) - Self-Inflicted 19:21:01 02/23/21 (0)
- RE: Cartridge clips are filled with solder - Story 04:48:33 02/23/21 (0)
- RE: Cartridge clips are filled with solder - John Elison 17:05:07 02/22/21 (3)
- RE: Cartridge clips are filled with solder - Wtucker1 08:28:44 02/23/21 (1)
- RE: Cartridge clips are filled with solder - John Elison 10:07:37 02/23/21 (0)
- RE: Cartridge clips are filled with solder - Wtucker1 17:12:34 02/22/21 (0)
- Solder sucker or desoldering wick, and don't use those guys again. Nt - viridian 16:17:48 02/22/21 (5)
- RE: Solder sucker or desoldering wick, and don't use those guys again. Nt - Wtucker1 17:11:49 02/22/21 (4)
- "done with guy" - 1973shovel 08:11:02 02/23/21 (2)
- RE: "done with guy" - Wtucker1 08:33:11 02/23/21 (1)
- I can't blame you for that. I'd do the same. Good luck (nt) - 1973shovel 09:02:46 02/23/21 (0)
- So sorry for your misfortune. John's council may be best, or have a pro replace them. Nt - viridian 17:28:40 02/22/21 (0)