Brace interference

Even in the solid plinth RP and current P series the brace is above the surface of the plinth. The position of the hole may still interfere with the positioning of the Q-UP. I would therefore look for a different system, similar to this linked product

...without the relatively high price tag as compared to the Q-UP.

https://www.littlefwend.com/list-of-compatible-turntables-fo (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Q-UP and Rega RP, P8, RP, P10 incompatible - Montmorency 14:33:36 08/19/20 (6)

Duct tape? Or use a hole saw with the appropriate diameter and depth on - alaskahiatt 14:42:36 08/19/20 (5)

RE: Duct tape? Or use a hole saw with the appropriate diameter and depth on - Montmorency 15:22:07 08/19/20 (4)

RE: Duct tape? Really? now you are just embarrassing yourself. - beach cruiser 18:21:21 08/24/20 (1)

Duct tape was never really considered. - Montmorency 21:41:59 08/24/20 (0)

RE: Duct tape? Or use a hole saw with the appropriate diameter and depth on - John-from Seattle 12:10:00 08/20/20 (1)

Brace interference - Montmorency 17:25:51 08/20/20 (0)

Follow Ups

Brace interference - Montmorency 17:25:51 08/20/20 (0)

Brace interference

Post a Message!