Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Ortofon 2M Black to replace Grado Platinum Reference ? posted by PAR on August 9, 2017 at 09:47:48:
I'll see your pedantry and raise you.... ;-)
Mine is based on an actual measurement on a calibrated shadow graph. It is the height of the undeflected system and was actually 18.65mm averaged from 10 measurements. As you will no doubt have observed, I suggested using that as a starting position and fine tuning. The arm height scale on the SL1200 for example is based on an undeflected cartridge height. Either way 50um is not going to be resolvable by most people. 0.6mm may also be of little relevance if he doesn't adjust for individual record thickness! On the other hand setting 18.6 will provide a reasonable solution that covers thicker heavy weight vinyl and normal thickness LPs.
Regards Anthony
"Beauty is Truth, Truth Beauty.." Keats
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Ortofon 2M Black to replace Grado Platinum Reference ? - flood2 12:15:46 08/09/17 (3)
- RE: Ortofon 2M Black to replace Grado Platinum Reference ? - PAR 16:37:38 08/09/17 (2)
- RE: Ortofon 2M Black to replace Grado Platinum Reference ? - flood2 20:37:17 08/09/17 (1)
- RE: Ortofon 2M Black to replace Grado Platinum Reference ? - PAR 02:24:33 08/10/17 (0)