|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: "Common wisdom regarding record wear"? posted by EdAInWestOC on July 19, 2017 at 05:56:51:
Design factors determine PU tracking (plus arm mechanics) but if, ideally, you can't cleanly trace the groove @/near manufacturers lower-end specs then there's something wrong/inappropriate; and subsequent 70's low-mass arms extended that range even further (ie SME/III compared to Series 2).
So it's tedious to encounter endless Old Wives' claims that a max weight is required: an ADC XLMII/III, in an optimal arm, requires ~1g:- there's no advantage in tracking (<)50% heavier (excepting theoretical beyond normal velocities) but manufacturers do widen their spec for sub-optimal 'good' arms ...and provide lesser models.
Nor, in the case of ADC/Shure, should you need worry about inherent suspension degradation over many decades storage.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Scare Tactics? - frankwm 08:45:37 07/19/17 (8)
- Claim what you want to... - EdAInWestOC 10:30:23 07/19/17 (1)
- RE: Claim what you want to... - frankwm 10:41:40 07/19/17 (0)
- "Nor, in the case of [ ]Shure, should you need worry about inherent suspension degradation over many decades" - 1973shovel 09:35:18 07/19/17 (5)
- That's not what Shure says. - frankwm 10:15:15 07/19/17 (4)
- What sort of Racist low life are you? - coffee-phil 16:50:47 07/19/17 (1)
- RE: What sort of Racist low life are you? - frankwm 17:19:36 07/19/17 (0)
- That's exactly what Shure says - 1973shovel 16:00:07 07/19/17 (1)
- RE: That's exactly what Shure says - rindolini 17:48:09 07/19/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
