RE: Compliance of Hana EL cartridge

Posted by John Elison (A) on May 26, 2017 at 23:04:13

In Reply to: RE: Compliance of Hana EL cartridge posted by SpotcheckBilly12345 on May 26, 2017 at 08:34:16:

The Japanese always specify compliance at 100-Hz so the compliance of the Hana EL cartridge is probably specified at 100-Hz. The article referenced by BCR stated the Hana EL had an arm/cartridge resonance of 9.5-Hz in the SME M2-9 tonearm, which has 9.5-grams effective mass. If you add 1-gram for mounting hardware to the 5-gram weight of the Hana EL, this indicates a compliance at resonance of about 18 x 10^-6 cm/dyne. This equates to an arm/cartridge resonance frequency of about 8.8-Hz in your Technics tonearm.

This should be okay!

Good luck,
John Elison

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Compliance of Hana EL cartridge - Terry 05:01:22 05/26/17 (6)

RE: Compliance of Hana EL cartridge - reidcc 14:48:29 05/29/17 (0)

Thanks, everyone! - Terry 08:16:46 05/27/17 (0)

RE: Compliance of Hana EL cartridge - BCR 07:34:03 05/26/17 (3)

RE: Compliance of Hana EL cartridge - SpotcheckBilly12345 08:34:16 05/26/17 (2)

RE: Compliance of Hana EL cartridge - John Elison 23:04:13 05/26/17 (1)

RE: Compliance of Hana EL cartridge - SpotcheckBilly12345 08:21:18 05/27/17 (0)

Follow Ups

RE: Compliance of Hana EL cartridge - John Elison 23:04:13 05/26/17 (1)

RE: Compliance of Hana EL cartridge - SpotcheckBilly12345 08:21:18 05/27/17 (0)

RE: Compliance of Hana EL cartridge

Post a Message!