My Kuzma counterweight has a set screw inside it. I put in extruding screws, amd laid wires to the side

Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

In Reply to: RE: You do know that ya set azimuth by twisting the counterweight? posted by bjamz on May 14, 2017 at 11:15:54:

Not the most elegant, but I could not get a great (by listening) vertical on my unipivot arm. So I took out the setscrew inside the counterweight, and placed two screws that stick out and are tight in it. readjusted it all, then used tiny strips of wire to 'adjust' the final vertical BY EAR.
For five years now my Kuzma Stabi Stogi S has a paperclip size bare 20g wire hanging off the right side of the counterweight. LOL

This post is made possible by the generous support of people like you and our sponsors:

Crux Audio

Follow Ups Full Thread

Topic - need a little help here..... - bjamz 03:59:04 05/14/17 (5)

If you have an offset counterweight, make sure it is ... - Quadzilla 11:45:07 05/14/17 (1)

RE: If you have an offset counterweight, make sure it is ... - Tre' 12:57:53 05/14/17 (0)

You do know that ya set azimuth by twisting the counterweight? - Rick W 09:23:27 05/14/17 (2)

RE: You do know that ya set azimuth by twisting the counterweight? - bjamz 11:15:54 05/14/17 (1)

My Kuzma counterweight has a set screw inside it. I put in extruding screws, amd laid wires to the side - 3+4=5 13:51:32 05/15/17 (0)

Follow Ups

My Kuzma counterweight has a set screw inside it. I put in extruding screws, amd laid wires to the side - 3+4=5 13:51:32 05/15/17 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.