Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Vinyl Asylum ]

---

[ Alert Moderator ]

---

My LP Playback of one LP in 44(+plus) Easy Steps

Posted by 3+4=5 on March 22, 2017 at 17:03:10

In Reply to: LP Playback in 15 Easy Steps posted by ecl876 on March 22, 2017 at 11:35:59:

1: Turn on phono preamp.
2: After a few minutes turn off 'mute' switch
3: Remove TT weight from spindle
5: Remove cover from TT (Kuzma with cover which sits under weight on spindle)
6: turn on switch on back of TT power supply
7: flip power switch on back of TT power supply
8: turn front power supply to '33'
9: push platter to help it start
10: flip main preamp selector to phono

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

11: look at LPs, decide which one to play
12: remove LP from shelf
13: take plastic outer sleeve off
14: Pull inner sleeve with record in it, out.
15: inspect LP surfaces for dust. (if clean go to step 16, if dirty go to step 15a, 15b, 15c,15d)
-+-+-+-+-+-+-+-+-+-+-+-+15a if needing real cleaning, turn on sink faucet
-+-+-+-+-+-+-+-+-+-+-+-+15b rinse LP in sink
-+-+-+-+-+-+-+-+-+-+-+-+15c pat dry,
-+-+-+-+-+-+-+-+-+-+-+-+15d vacuum off LP
16: place LP on spinning TT platter
17: place weight back on spindle
18: Move arm to correct starting position
19: eyeball stylus,
20: wipe with StyLast brush
21: recheck arm position over LP to hit lead in groove
22: flip arm lowering lever

23: sit to listen to LP side one.
24: get up to flip record
25: raise arm
26: move arm back to arm rest
27: remove weight from spindle
28: Pick up LP from spinning platter
29: flip LP over
30: place side B on spinning platter
31: place weight back on spindle
32: use stylast and brush stylus
33: place arm over LP leadin groove
34: lower arm with lever
35: listen to side B
36: get up to go back over to TT
37: lift arm with lever
38: move arm back to rest
39: remove weight from spindle
40: lift LP from spinning platter (added steps if one stopped the platter)
41: place LP back in inner sleeve
42: place LP and sleeve in jacket
43: place jacket in outer plastic sleeve
44: Reshelve LP back in order.


So #11 to #44 repeat for EACH LP played. Also if one stops the platter spinning, add those steps.

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---