Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: which SME for OC9ML/II posted by kal800 on February 22, 2017 at 13:52:25:
The dynamic compliance is the more relevant spec and the OC9 is more merdium compliance despite the low VTF range. You want to match it to a medium mass arm not a low mass arm - around 12g is a perfect match and puts the LF resonance around 10Hz in my system. I would be looking at a 309 or M2 or IV/V if you can stretch that far and still want to stick to SME. The LF resonance will still be in the ideal range.
Regards Anthony
"Beauty is Truth, Truth Beauty.." Keats
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: which SME for OC9ML/II - flood2 14:15:19 02/22/17 (4)
- RE: which SME for OC9ML/II - kal800 15:03:19 02/22/17 (3)
- RE: which SME for OC9ML/II - John Elison 21:13:32 02/22/17 (0)
- RE: which SME for OC9ML/II - kitch29 17:16:44 02/22/17 (0)
- RE: which SME for OC9ML/II - flood2 15:16:41 02/22/17 (0)