RE: P.S.

RE: P.S.

Posted by wayne lab (A) on January 11, 2017 at 01:48:45

In Reply to: P.S. posted by jkaschyk on January 10, 2017 at 10:52:46:

Thank you for the help on this do you perhaps have any recollection as to what the exact oil Jim recommended please?, and how to insert it into the bearing sleeve, As I have no manual at all and no idea of what to do?. Will the oil drain out of this bearing if the deck is spun over for 30 minutes or so?, the previous owner of this deck didn't realize that it had an oil filled bearing and turned it over to service the deck sadly.
I will attempt to remove the bearing in the meantime to take a more accurate picture of it and report back. Jim really did make some great products for this deck and I'm sure his expertise will be greatly missed by all who have come to own his products late on such as myself.
I also have the delrin / aluminium platter mat which I think is absolutely superb , most definitely stops the platter ringing .

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Applied Fidelity Bearing Identification and advice. - wayne lab 04:16:10 01/10/17 (16)

RE: Applied Fidelity Bearing Identification and advice. - jkaschyk 10:44:51 01/10/17 (10)

P.S. - jkaschyk 10:52:46 01/10/17 (9)

RE: P.S. - wayne lab 04:15:13 01/11/17 (6)

RE: P.S. - wayne lab 04:16:43 01/11/17 (5)

RE: P.S. - jkaschyk 06:28:50 01/11/17 (4)

RE: P.S. - wayne lab 01:16:47 01/14/17 (1)

RE: P.S. - jkaschyk 07:25:03 01/14/17 (0)

RE: P.S. - wayne lab 10:59:56 01/11/17 (1)

RE: P.S. - jkaschyk 11:43:13 01/11/17 (0)

RE: P.S. - wayne lab 01:48:45 01/11/17 (1)

I do not think spinning it will cause any problems - Penguin 21:01:16 01/12/17 (0)

RE: Applied Fidelity Bearing Identification and advice. - louie3 06:28:27 01/10/17 (0)

Can't tell from the picture - texanater 05:17:51 01/10/17 (3)

RE: Can't tell from the picture - Mel 07:48:32 01/10/17 (0)

RE: Can't tell from the picture - wayne lab 05:29:46 01/10/17 (1)

RE: Can't tell from the picture - texanater 05:44:13 01/10/17 (0)

Follow Ups

RE: P.S. - wayne lab 01:48:45 01/11/17 (1)

I do not think spinning it will cause any problems - Penguin 21:01:16 01/12/17 (0)

Post a Message!