Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Another parameter,... posted by Lew on December 29, 2016 at 11:14:47:
Is your AT-ART7 also high-compliance? Mine has a resonance frequency in-between 6 and 7-Hz in my 10.5-gram SME V. It is specified to have compliance of 10-cu at 100-Hz, which would be medium compliance, but both of the ones I bought were high-compliance cartridges.
On the other hand, the new AT-ART9 and the new AT-OC9/III are both specified as high-compliance cartridges with 18-cu at 100-Hz. The general rule-of-thumb is to double that for compliance at 10-Hz.
Maybe I should buy a MM cartridge. What would you recommend? I was thinking that an Audio Technica AT150MLX might be a good one. It is specified as medium-compliance with a rated output of 4.0-mV. What do you think? Is there a better one you would recommend?
Thanks,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Another parameter,... - John Elison 13:07:54 12/29/16 (13)
- RE: Another parameter,... - Lew 16:50:36 12/29/16 (0)
- RE: Another parameter,... - flood2 13:54:11 12/29/16 (11)
- RE: Another parameter,... - morricab 03:43:55 12/31/16 (1)
- RE: Another parameter,... - flood2 13:47:25 12/31/16 (0)
- RE: Another parameter,... - flood2 15:18:44 12/29/16 (6)
- RE: Another parameter,... - John Elison 21:16:48 12/29/16 (5)
- VM760SLC - rindolini 11:09:37 01/04/17 (4)
- RE: VM760SLC - flood2 15:47:20 01/04/17 (3)
- RE: VM760SLC - bill_stevenson@bellsouth.net 08:31:47 01/05/17 (2)
- RE: VM760SLC - flood2 02:02:25 01/07/17 (1)
- RE: VM760SLC - bill_stevenson@bellsouth.net 08:09:12 01/09/17 (0)
- RE: Another parameter,... - John Elison 14:30:35 12/29/16 (1)
- RE: Another parameter,... - flood2 15:38:28 12/29/16 (0)