|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Why two null points (long but illustrated) posted by dpy on April 4, 2002 at 13:02:11:
The error at the outer radius is kind of hard to measure from my screen but if the cartridge alignment is optimum it will only be a little over 2 degrees (about 2.33 degrees for a 9" tonearm although it looks like more than that in your picture) and the error at the inner radius is inconsequential unless you play a lot of 45s since your 66mm null point is at the normal minimum recorded radius on a 33 1/3 LP. Can you measure the error degrees at the outer radius in your drawing and post it? The maximum tracking error will normally occur at the outer radius and the error in your "zone B" will be a little over half that value, but in the opposite direction as you say.Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Just a couple comments - Dave I 08:38:27 04/06/02 (1)
- I can't do that..... - dpy 10:25:14 04/06/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
