Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Denon DL-103 and RB303 posted by John Elison on August 2, 2012 at 20:08:21:
...will probably put the counterweight at the end of the rear stub...or not be heavy enough. However, I can probably compensate for an inadequately heavy counterweight by decreasing the VTF at the spring dial.Thank you for the link to the headshell weight source, and yes, all I've read about Soundsmith in here tells me that's the way to go. I've also obtained a transformer and I'm going to use some resistors and rca plugs to get the proper loading using a method which I found in these archives--the method which you devised :)
Edits: 08/03/12
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Mass loading at the headshell - Macromusic 23:50:18 08/02/12 (3)
- Thank you both - Macromusic 19:39:45 08/03/12 (0)
- RE: Mass loading at the headshell - bacobits 11:42:52 08/03/12 (0)
- RE: Mass loading at the headshell - John Elison 11:39:35 08/03/12 (0)