|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: I really am struggling.... posted by pac on May 26, 2002 at 01:50:49:
Thanks for all the useful advise. I never realise the 'transport transplant' is so difficult. Because my CDP has three PCB; the one with all the displays and buttons, one connected to the transport, and the DAC part. The transport looks like a seperate unit from the rest of the player because all the connections are via three sockets.Is it possible to just replace the motor? I think it's very complicated because the CD-spinning motor is directly soldered on a tiny PCB together with pickup servo motor(which is the scary bit), i'm not brave enough to de-solder the motor without the possibility of replacing the whole unit if it fail. I won't get a new CDP because; A. it's brand new. B. It sounds brilliant despite the little noise.
I've always thought that all Sony and philips transports are readily available as off-the -shelf products. I will replace it with a new transport if the cost is $500 +/-150 or $700 if it's actually a better one. Per did you mention there's a sony OE part catalog? where can i find one please?
Thanks v.much for the advise,
William
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I really am struggling.... - Billyjo 07:03:18 05/26/02 (1)
- I really meant eliminate not evaluate...oops.. (nt.) - Billyjo 09:48:40 05/27/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
