|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Jon, my DIY RCA connections have a faulty process! posted by Edp on March 25, 1999 at 11:24:24:
The Tara RCA plugs.The ring portion (not the pin) is not directly attached to the stress relief/connector. There is a small amount of play, enough to make the ring loose connection to the stress relief portion. So when I either plug/unplug I could get any sort of combination of connections. By adding the heat shrink Kynar which adds a stiffness/set to the connectors so some of the connections were locked.
I took them all apart tonight and every one had the looseness, with some worse than others.
So they all got solder sweated, reterminated. Problems seem to have disappeared.
Time to find a new RCA connector source.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Ah ha, I think I found the common problem. - Edp 23:00:53 03/25/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
