|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Hola Homer...... posted by homer on January 4, 2002 at 06:47:12:
don't have the dimple in the middle.Tweaks:
1-Speakers....take two 3/4" thick pieces of MDF/wood about the size of your speakers bottom. Drill both shelves with a triangle configuration. The holes should hold the knobs prungs. Glue the knobs to the shelves and make a sandwich (face to face) with metal bearings in between. Put the devise on your stands and the speakers over it. Load the top of the speakers with some weigh. You can use two knobs in the back and one in front with the separation calculated based on the stands base.2-Rollers....buy (3) 1" copper end caps (looks like cups). Feel them with sand or lead shot. Deep the knobs into the cups and glue with epoxi the underside of the knobs to the edges of the caps. Check they are balanced. There you go, a 10 min. Round Rollers...Ah! use 3 bearings....
Regards,
JOse.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Ok, those are the ones I'm using and yes they are better and... - Jose Garcia 07:03:14 01/04/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
