Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Thanks but with more questions. posted by AT on June 10, 2001 at 23:39:52:
Hi,I'd suggest a good quality Foil & Film Capacitor. If your Amp has an Input Impedance of 100kOhm a 0.22uF unit will do fine, if it has 10kOhm input Impedance 2.2uF are needed, values inbetween cale lineary (eg 0.47uF for 50kOhm input impedance).
BTW, there are two electrolytic capacitors around the PCM1716 (pin 11 and pin 18) which are critical to the sound, as they are a direct part of the signal path. Substituting Black Gate or Elna Cerafine/Silmic will help a lot.
Ciao T
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Thanks but with more questions. - Thorsten 06:27:13 06/11/01 (4)
- Thanks for your information. - AT 09:49:31 06/11/01 (3)
- TDA1541 vs. PCM1702, PCM63, PCM1716.... - Thorsten 07:08:52 06/12/01 (1)
- Project started !!! - AT 09:59:21 06/12/01 (0)
- TDA1541A S1 crown - CreationX 19:16:38 06/11/01 (0)