|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Cones under amps posted by ST13 on May 19, 2001 at 01:53:49:
Vibration devices are very important in getting the best sound out of your equipment. There are quite a few ways to go about treatment, use the asylum search function to check the tweakers asylum for posts about diyumas, vibration isolation, innertubes, and mass loading, and you should come up with quite a lot of information to work with, though some nonsense as well. I personally really like the effect of DIYumas combined with mass loading, but that's just me. Sometimes cones are better, sometimes sorbothane, sometimes combinations. There are some people who like to use EVA foam, in conjunction with rigid layers to create amplifier vibration platforms. Try some cheap cones, and see if you hear a difference. Whether positive or negative, if you do, you can try any number of things to help fine tune your systems performance. There are dozens of ideas within the search topics I gave you, just be patient, as there are a lot of posts to sort through, and you should come up with a lot of fun little projects, and be able to enhance your system significantly at the same time. I don't own a piece of equipment that isn't on some sort of homemade vibration device.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- most certainly - badman 02:45:34 05/19/01 (3)
- yes indeed - dave c 17:44:05 05/19/01 (2)
- Re: yes indeed (and can turn "ugly" as well!) - Celluloid 11:44:11 05/20/01 (1)
- Gibraltar (agreed!) - dave c 17:25:44 05/20/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
