Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Fuse Direction Fix

Some comments on another fuse thread made a certain sense to me.
Power coming to your gear is AC. This to ME means that if a fuse can be considered a directional sensitve device, that 1/2 the time it is wrong and 1/2 correct.
And flipping it won't help.

I HAVE THE CURE.

A pair of fuses Each of the 'correct' value. A pair of Diodes of sufficient current capacity for the device to be fused. Anode / Cathode of the diode face in OPPOSITE directions and in series with one fuse each. Each pair is now parallelled so the AC flows thru only one fuse at a time and in opposite directions.....
I suspect a very small capacitor here somewhere to 'deglitch' the device......Or maybe use some kind of FRED?

When listening for directionality? Change direction of BOTH fuses at once. Or maybe just test-away. But in any event, SHOULD a fuse be shown to be 'directional'? This should provide some relief and a way to check.
Too much is never enough


This post is made possible by the generous support of people like you and our sponsors:
  Kimber Kable  


Topic - Fuse Direction Fix - pictureguy 16:46:38 01/28/23 (15)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.