|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Best sounding low voltage coupling capacitors (for a solid state circuit) posted by Lew on October 8, 2021 at 09:31:08:
...but if they're low enough, you might consider the Wima FKP, which were a favorite of the late Allen Wright of Vacuum State Electronics. They're polypropylene film & foil, and available from Mouser in lower voltages, which I'm assuming you want due to their generally smaller size. Capacitance in them is limited though.
Good luck, and thanks for an interesting topic.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Lew, you don't state which capacitance values you need - 1973shovel 07:28:45 10/09/21 (1)
- I ended up using capacitors I had on hand..... - Lew 16:58:36 10/11/21 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
