Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I recently got one of these back up and running (replaced the group of four small caps), but the output voltage is a little high at 122-123V (instead of 120V +/- 1V).
There are three trimpots inside, and I am guessing that one or all are required to adjust the output voltage.
Before I start experimenting, does anyone know what each of these trimpots adjust?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Exactpower EP-15A Voltage Adjustment - baileyler 05:23:55 09/01/21 (6)
- RE: Exactpower EP-15A Voltage Adjustment - MOONCRIKIT 11:31:59 06/25/22 (0)
- RE: Exactpower EP-15A Voltage Adjustment - livin 17:58:56 09/15/21 (0)
- RE: Exactpower EP-15A Voltage Adjustment - johntoste 15:47:32 09/01/21 (0)
- RE: Exactpower EP-15A Voltage Adjustment - jad 15:16:12 09/01/21 (0)
- I know your going to experiment - Story 06:04:00 09/01/21 (1)
- RE: I know your going to experiment - baileyler 06:20:52 09/01/21 (0)