Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Baffled by a switch mode power supply problem. posted by jedrider on March 30, 2021 at 10:21:40:
The thing wants to see some voltage above 12V at its input, probably because it has its own internal regulators that drop some voltage. If you don't feed it enough to trigger, it's dead. I had the same or a similar experience with a linear supply I built for a solid state phono stage. The preamp had markings on its PS input socket stating the min and max DC voltages it wanted to be fed, so I knew what my problem was in that case.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I think Jedrider has it right... - Lew 18:19:19 04/09/21 (0)