|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: IsoDamp C-1002 Adhesive to fix between MDF shelves? posted by FlyGuy on February 12, 2021 at 09:15:33:
You might try leaving one side without adhesive, keeping the adhered side up, and the non-adhered side lying against the bottom panel. The compliant layer will still act as a constrained layer, but with gravity acting as the bond at the bottom. This way the top board may be allowed to slightly resonate while the constrained layer dissipates the energy than if tightly bonded together. Worth a try before you apply a permanent adhesive, FlyGuy.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: IsoDamp C-1002 Adhesive to fix between MDF shelves? - Duster 05:33:32 02/14/21 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
