|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: I got the PCB out of the NAD receiver, but... posted by Ugly on November 19, 2020 at 17:13:18:
It is 10mm pitch. There is plenty of room for a compatible replacement. Not sure if radial is available in the same ratings. The local service shop has nothing on hand and says they rely on the same suppliers. I will probably remove the old one and reassemble the unit until the replacement arrives. Don't want to forget where all of those screws go...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I got the PCB out of the NAD receiver, but... - BS64 17:59:53 11/19/20 (2)
- got my description wrong? - BS64 19:42:19 11/19/20 (0)
- RE: I got the PCB out of the NAD receiver, but... - Ugly 18:28:57 11/19/20 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
