Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Test results: posted by tweakmenow on August 10, 2020 at 12:21:32:
Good experiment.
So you are saying that your original experiment with the regenerator would coordinate with 4 above? Specifically, that the Entech was physically far enough from the noisy SMPS that there would have been no airborne RF noise coupling.
I am surprised that the regenerator did not have incoming low pass filters. Doesn't seem like that would be terribly costly, parts-wise, for such a device.
I use a Topaz isolation transformer and it works really well in my home / system. Output is balanced AC with an independent ground wire to cold water pipe (same as breaker box). I have an additional small iso transformer, with noise filtering, connected to my balanced AC power, that feeds my DVD player. DVD power is completely disconnected if I am spinning vinyl.
Mike
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Test results: - MikeWI 22:27:45 08/11/20 (2)
- RE: Test results: - tweakmenow 22:54:50 08/11/20 (1)
- RE: Test results: - pictureguy 23:38:39 08/11/20 (0)