|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: one grief about WBT is the screws may never come back apart... posted by 3+4=5 on June 24, 2017 at 10:49:57:
The key to using set screw speaker cable connectors is implementing a copper crimp sleeve. That way there is more resistance to torque when tightening the set screws, with more subtle tightening involved rather than cranking-down on unrestrained wires within the termination point. The holding-power is much better via a copper crimp sleeve within the connector body, in any case. YMMV
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The key to using set screw speaker cable connectors... - Duster 17:25:49 06/28/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
