Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: shunyata cyclops posted by stator_99@yahoo.com on November 28, 2016 at 21:25:00:
Drill out the rivets, if it has them. Use short sheet metal screws in place of the rivets.
Damp the inside surfaces and the overhead brace with 3m damping tape, or other suitable material.
You can also install an Audio Magic Pulse Gen, or their PEA devise, and a toggle switch to turn the devise on or off.
For the bottom; outside, you could use 1/2 inch Terastone, or 1 inch custom wood, cut to the bottom dimensions. This will take some extra work to fasten on to the bottom. Then put feet on the Terastone or wood.
Tarq
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: shunyata cyclops - Tarquineous 23:29:52 12/06/16 (2)
- RE: shunyata cyclops - stator_99@yahoo.com 12:36:48 12/10/16 (1)
- RE: shunyata cyclops - SgreenP@MSN.com 20:28:51 12/11/16 (0)