Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: All can be answered with...... posted by MannyE on November 6, 2016 at 08:23:03:
Something is not right - there should be 0 volts between N and PE. P to N should be 120, P to PE 120. Are you measuring voltage with this inlet plugged in to the wall outlet? Be careful!
If it's not plugged in there will be no voltage.
If it is plugged in, are you sure that the outlet and power cord are wired correctly? Don't wire anything to this inlet until you discover what is wrong - it sounds like your ground pin is live - if you ground anything to it that will also become live.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: All can be answered with...... - Stereojim 10:20:10 11/06/16 (3)
- RE: All can be answered with...... - bcowen 10:27:05 11/06/16 (2)
- RE: All can be answered with...... - jea48 11:07:12 11/06/16 (0)
- RE: All can be answered with...... - Stereojim 10:59:19 11/06/16 (0)