|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Need some electrical help. posted by MannyE on November 4, 2016 at 19:53:09:
Did you buy the Triad magnetics transformer vpt30-1670 as suggested? The Boozhound instructions say that you need 15 volt AC secondary voltage. According to the transformer datasheet, to obtain 15 v AC, twist black and orange together, and twist red to yellow. The voltage between the black/orange and red/ywllow pairs should be 15v AC. Do you have a multimeter to check voltage? If so, do so. If not, I would suggest that you get an inexpensive voltage meter - if you are going to do any DIY audio, it is something you need. If you wire the transformer secondaries in series, you will have 30v AC, likely too much voltage - it will damage the voltage regulator. Wire them in parallel, and you should be fine. Good luck! Let us know how your project comes out - I'm sure others might also be interested in the Boozhound designs!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need some electrical help. - Stereojim 12:09:02 11/05/16 (1)
- RE: Need some electrical help. - MannyE 13:21:39 11/05/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
