|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Oyaide R1 outlet update. posted by bcowen on September 4, 2016 at 04:53:30:
Yes....it should be fine. The green LED might act a little differently due to the increased resistance (and mass) of the contacts within the duplexes, plus the two power cables, just so you are aware. Besides continuity, the green LED displays the pattern of the frequency sweep, which can alter slightly depending on that mass.
For instance, the pattern might look a little different when conditioning large caps, versus a group of power cables, or a daisy-chain of interconnects....the conductor mass is different. Nothing to worry about. It's a reactance issue.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Oyaide R1 outlet update. - alan m. kafton 11:50:48 09/04/16 (1)
- RE: Oyaide R1 outlet update. - David Pritchard 10:19:38 09/11/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
