Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

RE: Oyaide R1 outlet update.

Absolutely. You will be VERY surprised at the results.

Cooking the TP60 will also allow you to re-condition a couple of power cables at the same time, since those need a "recharge" as well.

One power cable would be installed into the IEC inlet of the TP60 (with the wall plug adaptor from the upper left set of binding posts) and the other power cable would be installed from one of the duplexes into the IEC adaptor of the Cooker, and then into the lower right set of binding posts. I recommend conditioning the furthermost duplex (from the IEC) first....then work yourself towards the TP60's IEC in succession. That way you're getting all the length of the internal wiring from the start. Call me if you have any particular questions....I can guide you in real time.

I would give each duplex a couple of days of conditioning. Put it back in your system, then let it draw current for a couple of days, allowing things to settle in before you do any serious listening again. Let us know the results!

This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  

Follow Ups Full Thread
Follow Ups
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]