|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: output caps for Marantz cd5004 posted by Michael Samra on June 23, 2016 at 15:54:18:
Thats correct. The output coupling cap on most gear, whether tube or SS is usually much larger than necessary. If you know the input Z of the following device, its easy to calculate what you need. I usually end up yanking the nasty electrolytic out and installing a smaller value film cap. Bass extension is still fine. Even if you dont know the input Z, use a scope and signal generator to measure the -3db point, and go from there.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: output caps for Marantz cd5004 - Hornlover 08:02:05 06/24/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
