|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Green posted by mehrdadb_gd on January 31, 2013 at 14:21:34:
on the caps helps to dampen the cap. Yamamoto actually encapsulates their coupling caps in beeswax with a wooden tube over the assembly.If the caps are fil types the ehat of the molten wax actually helps since many if the pastics will shrink a bit from the heat making for a tighter winding. I do not think adding the quartz would hurt and actually should have helped the top end, smoothing it out.
quartz at the ends of the caps are beneficial as the caps are made by winding foil. The ends would expose the open windings and it is there that the inductive magnetic fields would be the strongest.
Quartz in beeswax on the inductors should also be good. I don't know about coating the entire crossover board, however.
Stu
PS. Thanks for the photo !
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Beeswax - unclestu 17:51:03 01/31/13 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
