RE: Jon I appreciate your reply.

Posted by Jon Risch (B) on September 1, 2012 at 22:26:29

In Reply to: Jon I appreciate your reply. posted by jea48 on August 30, 2012 at 21:24:29:

Yes, at some point, they trip the breaker when the line goes low enough, or the circuit is set to shut down the switcher, as the AC line current can exceed what the input components were designed to handle. This would include the nearly mandatory AC line filter block, often one of the metal can all-in-one filter blocks with an IEC inlet, and possibly a breaker built-in.
Jon Risch

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - voltage drops question - sanman 16:47:52 08/28/12 (21)

Don't. - cdb 13:53:26 08/29/12 (3)

Utilities are - unclestu 14:00:15 08/29/12 (2)

RE: Utilities are - jea48 15:27:26 08/29/12 (0)

RE: Utilities are - cdb 15:18:41 08/29/12 (0)

RE: voltage drops question - wheezer 12:54:44 08/29/12 (0)

RE: voltage drops question - pictureguy 09:58:46 08/29/12 (11)

RE: voltage drops question - jea48 13:17:28 08/29/12 (10)

RE: voltage drops question - pictureguy 14:19:50 08/29/12 (8)

RE: voltage drops question - jea48 15:14:08 08/29/12 (7)

Two things - Jon Risch 20:37:30 08/29/12 (6)

RE: Two things - rick_m 09:28:49 08/30/12 (1)

RE: Two things - Jon Risch 19:43:27 08/30/12 (0)

I gave a simple example. Not technical...... - jea48 08:10:20 08/30/12 (3)

RE: I gave a simple example. Not technical...... - Jon Risch 19:59:15 08/30/12 (2)

Jon I appreciate your reply. - jea48 21:24:29 08/30/12 (1)

RE: Jon I appreciate your reply. - Jon Risch 22:26:29 09/01/12 (0)

RE: voltage drops question - ahendler 13:31:39 08/29/12 (0)

RE: voltage drops question - jea48 07:11:38 08/29/12 (0)

I wouldn't worry about the low voltage........... - viridian 06:35:30 08/29/12 (0)

RE: voltage drops question - Tweekeng 20:00:10 08/28/12 (1)

RE: voltage drops question - fmak 12:43:50 08/29/12 (0)

Follow Ups

RE: Jon I appreciate your reply. - Jon Risch 22:26:29 09/01/12 (0)

RE: Jon I appreciate your reply.

Post a Message!