Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Metcal solder iron problem posted by andy evans on July 18, 2012 at 11:54:59:
Most likely the co-axial connection to the tip is dirty.
Rotate the cold tip in the handset several times and it should clean up.
Solder smoke and flux residue are the usual suspects.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Metcal solder iron problem - djk 18:03:42 07/18/12 (0)