RE: vibration redux

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: vibration redux

Posted by Ric (A) on May 3, 2012 at 06:44:27

In Reply to: RE: vibration redux posted by Jack G on May 2, 2012 at 08:24:54:

Hi Jack, to date I have not used bona fide audiophile products for isolation, so I have very little to compare them to. I am slowly working up that ladder as I plan to try the much loved Herbie's isolation products now that I have something for comparison. My floor is a floating floor, which means that the boards (over concrete) are not glued, screwed or nailed down, so not the best for vibration control. Right now I have some ebayed Valab isolation product used with vibrapods(?) over a 2" thick piece of maple, so I would like to work on turntable isolation next. I'll have to look in to what you have as well. Thanks for the input!

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - vibration redux - Ric 07:42:08 05/02/12 (16)

I found these on Amazon, very inexpensive... - rlw 06:50:30 05/20/12 (6)

RE: I found these on Amazon, very inexpensive... - Ric 07:36:27 05/20/12 (5)

RE: I found these on Amazon, very inexpensive... - rick_m 08:17:12 05/20/12 (4)

Alert - geoffkait 08:53:16 05/20/12 (3)

RE: Alert - rick_m 11:28:12 05/20/12 (2)

RE: Alert - geoffkait 07:35:09 05/21/12 (1)

That's a pretty good idea... -nt - rick_m 08:27:43 05/21/12 (0)

what I have done - BS64 06:31:52 05/05/12 (1)

RE: what I have done - Ric 07:25:14 05/05/12 (0)

depends on the floor - BS64 02:46:29 05/04/12 (0)

John Dunlavy did not believe in anything under his speakers. He was wrong. nt - Norm 16:52:10 05/03/12 (0)

RE: vibration redux - Jive Turkey 13:48:49 05/02/12 (1)

RE: vibration redux - Ric 06:32:54 05/03/12 (0)

RE: vibration redux - Jack G 08:24:54 05/02/12 (2)

RE: vibration redux - hahax@verizon.net 20:37:19 05/03/12 (0)

RE: vibration redux - Ric 06:44:27 05/03/12 (0)

Follow Ups

RE: vibration redux - Ric 06:44:27 05/03/12 (0)

Post a Message!