Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: Do Crystals Work? The Results

Below are the TrueRTA graphs from the experiment. The first is the background radiation in my workroom, the second is the emissions from the switching power supply being used as the signal source, the third is the emissions with the bag of Rose Quartz in place, and the fourth is the emissions with the bag of Amethyst in place.

As you can see, the supply produced a prodigious amount of radiation, and neither the Rose Quartz nor the Amethyst had any effect on that radiation. When the plots are overlaid in True RTA they fall exactly on top of each other.

This is in contradiction to the results Elizabeth posted wherein she used a Greenlee GT-16 non-contact voltage meter to show that crystals completely attuated the radiation from a power supply umbilical cord. I checked the specs of the GT-16 meter and it is capable of detecting emissions in the frequency range of 50-500Hz, clearly within the range of frequencies in the plots below. Again, my experiment detected NO ATTENUATION at all from either Rose Quartz or Amethyst crystal chips.




BACKGROUND:






SUPPLY EMISSION NO CRYSTALS:






EMISSION with ROSE QUARTZ IN PLACE:






EMISSION with AMETHYST IN PLACE:







This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.